Anyone have a Mr Deburr Machine & a camera?

[brouser1]

Hello,

I am looking to build a vibratory tumbling machine. I want to build one similar to the:

Mr. Deburr Model 300DB 3-cu.ft. Vibratory Finishing Machine

I have searched locally & online, but I haven't found any pics of the motor position and how it connects/attaches to the bottom of the tank.

If you have one of these machine, please let me know.

Thanks
Eric

[nofx]

I am interested in this as well. I was wondering if anyone has any ideas of where to source deburring material. I have read about using a fluid wash to clean the material out. I don't know if that is needed. Everything is better with coolant even if its dirty.

[brouser1]

Please do not hijack this thread, ...where to source deburring material, this info is easily found with a google search.

[nofx]

Wow
I'm not hijacking. Its interesting thought I was just trying to condense the most information about this subject into the same place at the same time becasue maybe you would be interested in this information aswell seeing as you want to build a machine that uses this. Seeing as how the person posting on your question may know more then just the information your requesting.