need about 100 of these suckers lathed. Can you do it?

[jpatz18]

Sorry if i posted in the wrong forum. The end is angled cut.

Had someone that was going to do it i did some reasearch on him and he only wanted cash and i felt it wasnt a good choice.

[RICHARD ZASTROW]

Looks like a fish arrow drawing with incomplete dimensioning.

Dick Z

[TripleTFab]

give more measurements might be able to burn them then drill them .

[pofo]

I sure can. I can whittle 'em up in no time outta wood. Or I could make 'em outta some old cardboard I got leftover from the fridge I just got. I'll just eyeball that sharp straight end and then for the bent part, I could.... well if it were made of putty I could just kinda smash it over.

$465 each for pine. $480 for oak.
Hundert even for putty.
If'in ya want another material let me know and I'll see if I have some laying around.

[jpatz18]

its round bar (303)ss . i dont have a cad. I try to describe it the best i can.

Its drilled with a 1/4 bit cut at an angle(/) like that at the end. Then stopped right before the 1/8 hole. then the chisel point. Sorry im not that good at describing.

Im sorry what other measurements you need? Im new at this...

[pofo]

You need to show at least two and preferably three views. Let's call this the front view. Draw a side view and a top view.

No one can tell what the thing on the left side is or how to make it. Is that curve consisting of two radius or straight cuts? Since the thing on the left side only is on the bottom, it's assumed it is somehow milled off or otherwise machined. Perhaps you are trying to show a horn shape, but don't know how to draw it. The other two views will clear this up.

Define the angle on the right or the length of the angle.

[jpatz18]

ok i see what your saying the left side i plan on doing myself. Its a straight angle cut(miter)35', just "bent to fishtail it out of place."

Does that give you a better picture. Or i can take some pics of it...

[jpatz18]

heres the best i could do here is what i basically need done. then when they get here i can bend the out of place. I dont need the the piece bent out of place.

Here is the same basic but is a V cut. I guess its just flared out....

[pofo]

Ok, now people know what you want. You should still specify the angle of the tip.

Good luck.

[aucran]

Sorry, it was bugging me...

I used the pictures for an idea, and I guessed at what I didn't know.I'm assuming the hook at the end is formed by bending, that might distort the 0.25 hole through the end, making it more of an oval shape.

You'll need to the red dimensions to make this. Maybe someone else will think of something I missed that you'll need too.


...I have way too much spare time at work lately.

[jpatz18]

yes you are correct thats exactly what i needed it does leave an oval shape now just gotta find someone that can do them without breaking my bank...lol

[knudsen]

100? You have more carp than we do.