Well for them prices for a brand new machine depending on size your not going to get much, especially a lathe and a good turning center you won't even be able to touch. For a mill you could go with a 3axis bridgeport factory retrofitted with a controller what controller I don't know because I don't have that particular one, but for about $17,000 -$18,000 right out of MSC catalog I beleive is the catalog. I get so many so it's a little hard to remember. And a lathe I don't know I have a big Moreseiki retrofitted with big servo's that is way out of that ball park price that your willing to pay and even just the bare lathe without the retrofit is about 12-15 times what your willing to pay. So for a lathe or turning center something decent your going to be looking at about at least $30-$50 grand Used for something good. Like I said before though you might not need anything that big. Somebody else like I'm sure a machine salesman will see this and try to sell you something, what I don't know I see alot of piddly garbage floating around on this website so I don't know. Goodluck and be wise with that dollar, because they all "salesman" will tell you what you want to hear to take it away from you.