Another CNC Mill to look at...

[Levil]

Hi everyone,

I just joined this forum and wanted to introduce us as a company (Levil Technology). I think some of you might be interested in what we have to offer for CNC milling solutions. Any feedback is appreciated (good or bad).



We are a Florida based company dedicated to the manufacturing of Table top CNC milling machines. These are some of the attributes of our LV350D Plus that make our machines stand out:

Servo Motors
We have years of experience in motion control using servo motors in CNC machines and aviation instrumentation. 4000 counts/rev encoders with close loop feedback servos make motion control far more precise, reliable and a lot faster than stepper motors.

Rigidity and Precision
LV350D Basic utilizes Ball Rolled Screws with Backlash adjustable ball nuts for better precision and 15 mm Hiwin Linear guides far more reliable and durable than round guides or aluminum guides used in other machines. Resolution: 0.00003”, Positioning 0.0004” , Repeatability: 0.0002” .

Versatility
LV350D Plus comes standard with an 18000 RPM spindle and automatic tool changer for up to 15 tools. You can upgrade your machine to a high speed spindle (Colombo Spindle 40,000RPM) if your application requires very high cutting speed. Auto-tool changer will tremendously reduce the work load and cost of production. The machine is also ready for an easy to plug 4th axis if needed in the future.

Speed
Communication between machine and computer is via USB instead of parallel port for faster communication. LV350D has an incredible rapid traverse of 400 in/min and max feed of 236 in/min making it one of the fastest machines of its category.


You guys can take a closer look at our machines at www.levil.com

[tobyaxis]

The WL400 is a Highly impressive Mill for its size.