Can anyone suggest any good sources of information on the web of available suppliers for Aluminum, Copper and other Non-Ferrous Metals?
I am looking for rectangular stock in various sizes and grades for CNC machining.
Paul; that place is expensive
I get mine from Peckovers in Mississauga
min is $100 CND but hooooo they are so much cheaper
Place a quick phone call to them
I use a girl called Sharon; very helpfull
I got my stock in 2 days and I ordered 6 lengths (12ft) 1/4" and 6 of 5/32nd all for $100
These guys don't always have everything you might be looking for but their prices and service are great: http://www.lowcostmetals.com. One of the few places I've found where I can use Paypal to pay.
JR that's a great resource, thanks. Good organization of the web site, and one of the few dealers that stocks more than one or two alloys. And the price does seem decent.
Thanks to all for the great information
Can anyone suggest Aluminum suppliers in Australia for machining with 6061 or 2011.
I am looking for aluminium block size roughly 60x70x300mm and I had serious problem finding a suitable supplier in Sydney.
Length is not a problem as i have a bandsaw.
I've used speedymetals.com before and found their pirces very reasonable with prompt shipping and they have a very large selection of materials and sizes.