We installed Bobcad V23 and the Predator CNC Editor for Bobcad (version 2005.7.0.40) and we are unable to drip feed. We had an older version of predator that we used constantly to drip feed but, when we installed the predator that came with bobcad we had to remove the older version that we no longer have the license for. I can't seem to get a straight answer from Bobcad they want to try to find something wrong with my machine, pc, or process however, so far they cannot tell me why I can't drip feed. Does this version of predator have the capability to drip feed. I have tried different DNC property configs, I know the baud rate and all of that is correct for the machine. Predator charges for tech support and bobcad tech support won't respond with a solution.