Problem- miyano BNC-34S parameters twin spinle single turret lathe

[mr pitt]

can anyone help with a parameter list for a Miyano BNC-34S ser no. BN30489S it is a twin spindle, single turret lathe
it has a fanuc O contol about 1988 think its A or early B as cannot view the ladder need also the diagnostic timers counters etc. the machine had been left standing for few weeks even though the customer knew it had BAT alarm on screen.
have tried Miyano UK (formerly MAcro cnc services of stourbridge, West Midlands) with no joy.
have a list from a similar machine but cannot get "B" axis to reference properly, it rapids but goes into creep when you take your finger off the B+ button. Then references anywhere if i press this button again. any ideas anyone?

[peaceandcalm]

I have Similar machine but BND 51s2..do you want to try my parameters?

[Al_The_Man]

The A cannot display ladder AFAIK.
You will also need the 900 option parameters.
Al.

[mr pitt]

cheers peace and calm can you email them to me @ bradwootton@hotmail.com. i would be most greatful as the machine been down for about 3 months now

[peaceandcalm]

Hi there..i sent you email just now, please reply so i can send you the parameters.

[smellyfeet]

Hi, Have you tried starting the controller while holding P and Cancel then zero return?

[BoKo]

Hi guys! Can anyone help me with a parameter list for a Miyano BNC-34T with GE Fanuc OT (one spindle, two turrets but turret B for drills, taps, reamers only)? Mach is very old, after rebuilt and works properly but we had a problem with battery and lost all parameters. Now I have big problem with turret B. It starts but when I want to use SINGLE POINT and DRY RUN buttons turret B works with full speed (at this moment turret A works very slow). It is possible send all parameters to my PC?
BoKo