Hobby welder for blades

[Dag-50]

Place the sketch, of the mechanical part of the spot welder for blades, if I succeed to make to leave the camera, ( battery low) I will put also the photos of the state puts into effect them. They are not successful to recover a transformer of elevated power, to the maximum they have arrived to 300 VA and me they seem little regarding that I tried, I hope of having more fortune this week.

[Dag-50]

Here the photos of the jobs at the moment.

[Dag-50]

This evening, since I have not found other, I have made the secondary winding of the trafo from 300 VA that I possessed, I have used a flexible rope from 35 mmq that, after to have it sguainata it has been isolated with four layers of paper tape. I have tried under tension and, with six coils, in escape I obtain 3,2 V, we hope that they are enough

[Mr.Chips]

Nice work.
What kind of blades are you spot welding?

Thanks for the pictures.

[Dag-50]

Servants in order not to knit sheets to points, are a system of welding of the blades for circulars, they come knit of head.

[Dag-50]

Ecco lo schema di come ho effettuato i collegamenti elettrici.

Here the outline of as I have carried out the connections electrical workers.

[Dag-50]

Yesterday, with a little free time, I have completed jobs and tests of the welder for blades.

Ieri, con un po' di tempo libero, ho ultimato lavori e prove della saldatrice per lame.