Need Help!- Propo JR JN280 lathe-mill benchtop

[oneafterburner]

hello all. i need some help identifying my machine and finding who or where i can get parts. i bought this thing last year and have been using it with great sucess, but i am limited to things i can do because i need a tailstock and feed controls. this machine on the front only has the following information from top to bottom and is the only info on the machine any where.
JR
Propo
JN280
Serin no: 3054
Feel the Difference
i have done an internet search and i found a thread here from a guy looking to buy this exact machine and theadmin found a basic spec sheet for it but there is no other info folloing. here is the thread to it -it has very good pictures of the machine i have (mines better looking- minus the tailstock)
http://www.cnczone.com/forums/benchtop_machines/51063-can_you_help_information_jn280.html#post398796

hopefully you all can help me find the manufacture, parts, something. please this is driving me nuts. i havent been able to locate a tailstock since i bought it. the guy i got it from bought it new but does not have any papers on it, or any info that he is willing to give me. it has been an up hill battle finding cullets, carbides, vises, belts, etc. but now i cannot go any further in making bushings, bearings, cutting down long stock etc with out a tail stock.

help help
thanks for your time
tom card

[Grego51]

Hi,

This machins was sold by Wholesale Tool Co. Inc. of Warren, MI.
It was depicted in their 2008-2009 catalog on page 301 having Order No. 3014-0010 and selling then for $895.

I am thinking about getting this or a like machine but am concerned that support and parts could be an issue.

WWT's telephone # is 1-800-521-3420 for their warren location.

Let me know if they were able to help you. Good luck!

Grego51

[5ms?]

Are you still looking for info on the JN280.
I have one.