Need advise on band saw...or something to cut stock.

[jinu117]

I've been using the cheap HF 4x6 for some time now. While it does it's job and all, I need something that can cut.... more SQUARE.
Also, some stocks I want to cut can be as thin as 1/8"... (or am I dreaming?)
Typically I am cutting round stock of 1.5" diameter copper or .5x2" copper blocks.
I really don't like idea of resurfacing every time on mill for stock (at least the part where it need to handle a lot of due to squarness issue)
I am wondering what bandsaw would minimize resurfacing procedure while keeping it (I am on budget... maybe up to $1k would be it).
http://cgi.ebay.com/ws/eBayISAPI.dll...MEWA:IT&ih=004
This is another option I've been thinking... (I am local to it sort of... about 70 miles drive). Would something like this cold saw be better choice than bandsaw?

[DareBee]

FYI cold saws work extremely well on soft material - for what it is worth.
Your budget is very small to really step up much in cut quality.

A high speed carbide blade saw (kinda like a chop saw) may be a good buy for you. Dewalt has a nice 1 with 14" blade. They cut very fast as well.