Need schematic for Eltee Pulsitron EDM

[Old Timer]

Hi, I've been googling around and ended up here, not sure if anyone can help.

I have an old Eltee Pulsitron conventional EDM that blew up last week. A friend is good with electronics and has fixed several things but now we need a schematic for the gap condition board. I have the manuals with the general schematics, but this is not included.

Can anyone help? TIA!

[Gary De Young]

Hi,

Maybe I can help you out. I used to work for Eltee Pulsitron from 1981 to 1986. I was the head of the test floor and Sr. Electronic Tech there for 5 years. At the time that LT closed there doors, I went out on my own and started repairing these machines here & there. I haven't done any in recent years but I still have some parts and components. I remember alot of the machine & circuits. I don't have any schematics but I can make one from a board. Since you have the schematics, this may help me too. Maybe we can do some business. Where is the machine located? Please reply to S7KB2JXM@Juno.com.

[ssmt21]

Originally Posted by Old Timer Hi, I've been googling around and ended up here, not sure if anyone can help. I have an old Eltee Pulsitron conventional EDM that blew up last week. A friend is good with electronics and has fixed several things but now we need a schematic for the gap condition board. I have the manuals with the general schematics, but this is not included. Can anyone help? TIA!

Can you please share available information for the subject matter I have recently bought 2 nos of second hand machine without documentation.
Condition of the machine is good and we need support on documentation side.
Detail of the machine are as below-
EDM machine
Make - ELTEE PULSITRON
Model - EP 30
Sl. No. 0721 & 845
Volts - 210/230/250/460
Ph. 3
Cycle - 60
KVA - 6

[ssmt21]

Originally Posted by Gary De Young Hi, Maybe I can help you out. I used to work for Eltee Pulsitron from 1981 to 1986. I was the head of the test floor and Sr. Electronic Tech there for 5 years. At the time that LT closed there doors, I went out on my own and started repairing these machines here & there. I haven't done any in recent years but I still have some parts and components. I remember alot of the machine & circuits. I don't have any schematics but I can make one from a board. Since you have the schematics, this may help me too. Maybe we can do some business. Where is the machine located? Please reply to S7KB2JXM@Juno.com.

--------------------------------------------------------------------------

Can you please share available information for the subject matter I have recently bought 2 nos of second hand machine without documentation.
Condition of the machine is good and we need support on documentation side.
Detail of the machine are as below-
EDM machine
Make - ELTEE PULSITRON
Model - EP 30
Sl. No. 0721 & 845
Volts - 210/230/250/460
Ph. 3
Cycle - 60
KVA - 6

[Old Timer]

Originally Posted by ssmt21 Can you please share available information for the subject matter I have recently bought 2 nos of second hand machine without documentation. Condition of the machine is good and we need support on documentation side. Detail of the machine are as below- . . . .

What do you need to know?

[ssmt21]

Originally Posted by Old Timer What do you need to know?

________________________________

I need documentation like circuit diagram, Instruction manual, Operating manual for the machine.
Regards.