Had a 240 mm fan and thought that would be a great way to get rid of the thru hole in the door. Almost got it centered,I will probably have this blowing out to pull heat out of electronics area.
Started some mud work while waiting on metal order to arrive. I first used a fiberglass strand to seal for any possible leaks and smoothed the rest with regular bondo.
Once it ready for paint I will use a 2 part urethane primer and finish with 2-3 coats urethane base coat and 2 coats urethane clear.
Haven't really decided on color yet have to see what I have in stock.
But think I will paint lathe and mill white and the base silver with blue stripe across the front and just maybe some airbrush work here and there.
Inside of cabinet and motor area I will do in black bed liner coating for durability and sound deadening.
New panels weld in today for the enclosure.
Still have no idea how I'm going to handle the lid or doors yet with mill sticking up.
Hope to get lathe and mill bolted in next week for final mockup so i can get cabinet painted and start on things I know nothing about!
This is where I'm at for now. I know it may seem like alot got done in 2 days but this has been down a LONG time!
Oh I did get doors done tonight I will post them tomorrow I forgot to take SD card out with me.
Anybody see me doing something stupid let me know....Comments welcome!
* This Worklog post was generated using WorklogCreator - Version: 126.96.36.199
* Free Download: http://www.mod2software.com/worklogc...logcreator.zip