Machinable wax - SFM

[jkeyser14]

I just got handed a piece of machinable wax that I need to use to mill out a prototype in the next couple hours, does anyone know the SFM for wax? I don't have enough time to experiment with speeds since they want this thing by early this afternoon.

[Chris D]

Just cut it and don't worry about the speeds, it's only wax.

Chris

[sendkeys]

hope i am in time but try
http://www.freemansupply.com/datashe...an/MachWax.pdf
from the pdf.

3,000 rpm 100 ipm for roughing
8000-10,000 rpm 40-100 ipm for finishing

with a 1/2in ball endmill

best i have seen i got some wax here im going to try out when my machine is done