MATSUURA MC-510VG ATC alarm

[bobancurug]

Hello,

I write you in hopes that you will help me to solve the problem on machines MATSUURA MC-510VG system YASNAC300
Sensor is not able to find the first tool . We are old sensor replaced with new ones.But now, I need guidance on how to insert current number of tool in
the tool screen as NEXT TOOL, because the machine still does not count tools.
The column NEXT TOOL is empty, do not write anything, the magazine on manual controls can be run. the MDI mode is unable to run.

We have alarm

6616 CYCLE START LOCK IS BEING APPLIED

and 6147 A TOOL No. IS BEING SET ON THE SCREEN TOOL SETTINGS

this means that we need a procedure how to put the current number of tool pot in the number of diagnostic tools, or parameters where it would be write.
unfortunately when buying a machine I have not received the necessary documentation so I asked you if someone please send me on the mail address the maintenance manual,operator manual
and electric scheme,if is possible.
Or just write me the procedure how to fix it

type MATSUURA MC-510VG
SNo 10432
MNF. Year 1999
System YASNAK 300

Best regards,
Boroja Slobodan
sboroja@gmail.com

[bobancurug]

STILL NEED HELP ON THIS PROBLEM. PLEASE!