Hey there All!!
I need a little help getting my computer to turn my mill off and on. I have a Teco FM50 VFD and a Logitrol controller that has 2 relays. I can hear the relay when I hit the toggle spindle button in Mach3 but cant seem to figure out how to get it to control the VFD. I have one wire out of my relay going to the FWD terminal and one going to the Relay terminal, and I also have adjusted the F10 parameter(Start/Stop Control) to 1 which is Terminal(TM2).
What am I missing folks? Any advice would be greatly appreciated!
Thanks in advance.