| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| General Material Machining Solutions Discuss Material Machining Problems and Solutions Here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
08-30-2007, 06:34 PM
| |||
| |||
I am going to be cutting 1/4" to 3/4" cell cast acrylic. What bits should I use to cut with.  |
|
#3
08-30-2007, 09:41 PM
| |||
| |||
| where can I get them from |
|
#5
08-30-2007, 10:04 PM
| |||
| |||
We've found that Onsrud brand single spiral up flute bits work the best. We use a strong air spray to cool the chips/bit and blow them out of the way. Check Onsrud out at plasticrouting.com. John |
| Sponsored Links |
| |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Engraving acrylic, which bits | LJN | General Material Machining Solutions | 4 | 05-10-2010 06:15 PM |
| RFQ....Acrylic or Polycarbonate | dvsmac | Employment Opportunity | 6 | 05-10-2007 08:58 PM |
| Acrylic | blfuller123 | DIY-CNC Router Table Machines | 3 | 12-28-2006 08:15 AM |
| Acrylic | Mike7 | Vacuum forming, Thermoforming Etc | 2 | 10-30-2006 10:16 AM |
| Acrylic questions | blfuller123 | Glass, Plastic and Stone | 3 | 03-10-2006 11:39 AM |
| | |
Linear Mode
