Focusing lens

[cmh6473]

I have an IE1200 with a 60 watt laser. I was cleaning the focusing lens today and it slipped out of my lens tissue and hit the floor and shattered. Does anyone know where I can get a replacement lens for a Chinese machine? I believe it is a 2" focusing lens.
I was just going to start engraving a wood photo album for a customer and now I am in a bind.
Any help from anyone with experience in this area will be greatly appreciated.
I assume that a 2" focusing lens is a 2" focusing lens. So are they manufacturer specific or are they pretty universal?
Thanks
Chris

[zax15uk]

Chris,

Sorry to hear that.

Yes, you need the correct diameter and 2" FL (50mm) ZnSe lens, easy to find on ebay or direct from one of the US resellers.

Zax.

[cmh6473]

Thanks for the quick help. I found what I needed right away.
You deserve an extra piece of raisin pie.

Chris,

Sorry to hear that.

Yes, you need the correct diameter and 2" FL (50mm) ZnSe lens, easy to find on ebay or direct from one of the US resellers.

Zax.

[lamicron]

I found the lense in eclaser, 0.75 OD x 2"FL(50mm ) the price is about $28 (PVD) and 48(CVD) DHL shipping from china.
Check the price list and the address, talk to Hillery
Luis

[cmh6473]

Thanks for the file. I am looking at it right now.
Apiece of raisin pie for you too.
Chris

I found the lense in eclaser, 0.75 OD x 2"FL(50mm ) the price is about $28 (PVD) and 48(CVD) DHL shipping from china.
Check the price list and the address, talk to Hillery
Luis

[cicigweike]

You can buy focus lens from USA too.
We are chinese laser engraving machine manufacture, we import lots focus lens from USA. some user like cheaper chinese focus lens, some like good quality USA focus lens.

The USA focus lens can used at chinese machine, no problem.

But please take care diameter and focus high .
I think 60w choose 50 is ok. 80w usually 68.