"EXLAS LASER" with panasonic servo system

[EXLASer]

Hi,
Please see our servo EXLAS, this servo machine has much higher working speed(you can contact me to get the working video, very amazing speed and quality), using servo, you get much higher speed and much better stability!
Regards/mike
mike@xyz-tech.com

[bpoulin]

When I was shopping, nobody offered servos except you. Nice to see it trickling down into the smaller models.

[EXLASer]

Yup .I had sent you working video with details.
Mike

[EXLASer]

The email with video which compressed almost over 10MB,Hope you received!!

[MonoNeuron]

Hi EXLAser,
Have you posted on YouTube your video. Then all you need do is post the link here for everyone to see.
I can only download 5 meg files in email so YouTube is a much better option and also will get you a lot more people looking and wanting to buy your machine.
I would like to have a look as I am in the process of retrofitting my laser to Yaskawa servos. I am trying out the 100 watt drives but I also have a couple of 200 watt and 400 watt ones for other projects that I could use if needed.
Nice machine build and very neat design. I hope you do well.
Rich.

[bpoulin]

I posted the video he sent me, you can look at it here. It looks very fast, quiet and smooth.
[nomedia="http://www.youtube.com/watch?v=Rzd-XgjW3tI"]YouTube - servo_EXLAS.WMV[/nomedia]

[EXLASer]

pls check video that bpoulin posted,as you know-Chinese Gov controls youtube web in China(I tried logining but not sucess,thanks AGAIN for bpoulin's help!!)
Rich,so far we use 400watt Panasonic Drvs equip machine,but I think 200 with 400watt are ok for your retrofitting,waiting for your good news that and upload some videos then,
I will also keep updating for that.
mike

Hi EXLAser,
Have you posted on YouTube your video. Then all you need do is post the link here for everyone to see.
I can only download 5 meg files in email so YouTube is a much better option and also will get you a lot more people looking and wanting to buy your machine.
I would like to have a look as I am in the process of retrofitting my laser to Yaskawa servos. I am trying out the 100 watt drives but I also have a couple of 200 watt and 400 watt ones for other projects that I could use if needed.
Nice machine build and very neat design. I hope you do well.
Rich.

[bpoulin]

Here are a few more videos
6090 CNC router/engraver
[nomedia="http://www.youtube.com/watch?v=Y-bfAROLxm8"]YouTube - 6090 on Woodworking Video.wmv[/nomedia]
6090 with rotary attachment
[nomedia="http://www.youtube.com/watch?v=M0PgtzTjZTE"]YouTube - face woodworking video-XYZ6090.wmv[/nomedia]

[EXLASer]

Hi friend,
Pay attention to our website.
CNC Router Laser Cutting Machine CNC Engraving Machine-XYZ Technologies Limited
Mike

[EXLASer]

Hi all,
Here attached some photos of EXLAS laser engraving machines
Best Regards/Mike
MSN:mike_xyz-tech@hotmail.com
mike@xyz-tech.com