This may be the wrong forum, in which case I apologize. A friend of mine recently bought a sherline mill for jewelry designs, and through work I have access to the gemvision matrix program. I don't actually know anything about taking the design from the matrix program to the milled wax though, and don't know anything about sherline mills. What would be necessary to make the matrix design on the sherline mill? I know I need a program that will allow the pc to control the mill, and was told that Mach3 would be the way to go for that. Is that true? Also, is another program necessary to get the gcode from the matrix design and into the Mach3 program? (keep in mind that as I ask this, I don't really know what gcode is other than a programming language for running CNC machines.) Can anyone help me with advice on what else is needed to make this happen, or links to some very basic tutorials on what I'm even really trying to ask? Thanks!