Need Help!- Stepper Motor to Gecko 251 Board Wiring

[Mr.Chips]

I have listed the keling stepper spec sheet (KL23H286-20-8B. AND what I think equals the Gecko G251 below.

IS THIS CORRECT?

Is this correct?
Keling Gecko
A+ = PHASE A
A- = PHASE /A
B+ = PHASE B
B- = PHASE /B

I am in the last stage of wiring and don't want to loose any of the Magic Blue Smoke.

How I wish there was a common use of terms.

Thanks

Hager

[ger21]

That'll work fine. As long as the A's and B's use the same symbols, it's good.

[Mr.Chips]

Originally Posted by ger21 As long as the A's and B's use the same symbols, it's good.

I do not understand your reply. The symbols are different that is why I need to understand the correct connections.

Let me restate the question.

I have attached a drawing of the Keling Stepper motor and the connections that I think should go to the Gecko G251.

Are my connections correct?

Thanks

Hager

[ger21]

Yes, they are correct.

[Mr.Chips]

Originally Posted by ger21 Yes, they are correct.

Thanks Ger, That's what I need to know!