| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| General Electronics Discussion Discuss basic electronics, power supplies and anything else electronic related here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
11-07-2009, 04:53 PM
| |||
| |||
i think i have a prob in the usb to db25 thinggie. i just put everything togother, but nothing, do i have to asign somrthing to the usb port? i know i must sound like a i dont know anything , its cause this is my first cnc project  |
|
#2
11-07-2009, 05:18 PM
| ||||
| ||||
| I don't know what you're trying to do, but typically a USB to parallel port cable will not work.
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
#3
11-07-2009, 06:52 PM
| |||
| |||
| i dont have a parallel port so im trying to us a usb/input serial/outputdb25 i have everything connected and nothing no clue what im doing wrong |
|
#4
11-07-2009, 06:57 PM
| ||||
| ||||
| If your trying to send step/direction signals through the USB, it won't work. What are you connecting it to?
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
#5
11-08-2009, 12:51 PM
| |||
| |||
| ok i went out and bought a printer 25 pin mod for the pcu wil try it now |
| Sponsored Links |
| |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| THC-300 not working | bad-rat-57 | CNC Plasma and Waterjet Machines | 1 | 07-30-2008 11:13 PM |
| THC 300 not working? | Redline | CNC Plasma and Waterjet Machines | 3 | 12-30-2006 08:40 PM |
| Eia Iso Not Working | honk | Mazak, Mitsubishi, Mazatrol | 12 | 08-16-2006 07:17 AM |
| Not working well. | ihkim | Servo Motors and Drives | 3 | 05-23-2005 05:32 PM |
| What I'm working on- | CNCadmin | Forum Questions or Problems | 2 | 07-21-2004 11:31 PM |
| | |
Linear Mode
