Source for shielded wire?

[LeeWay]

Hey guys.
Where might I find some wire or cable for using between the Xylotex and the 6 wire stepper motors that I have?
Am I correct in assuming that it needs to be sheilded? Thanks in advance.

[ToyMaker]

two sources that I use for most of my electronic needs are:
www.mouser.com
and
www.digikey.com
Shielding on your power leads is not an absolute requirement, but properly grounded it won't hurt either.

robotic regards,

Tom
= = = = =
“You hear it said that fathers want their sons to be what they feel they cannot themselves be, but I tell you it also works the other way.”
- - Sherwood Anderson, American writer

[LeeWay]

Thanks for the response and links. I looked at them and it seems that they only sell 500 to 1000' reels of cable. I think the most I could possibly ned is 50'. I can order it by the foot at Mcmaster Carr. What specific type should I be looking for?

[ViperTX]

LeeWay,

Check Jameco.com.

[cbcnc]

LeeWay,

I have some you might be interested in. I was selling it here (classified section) for a while. Reasonable. PM me and I will send you the details.

Chris Barker

[dmgdesigns]

Low cost and shipping.

http://www.allelectronics.com/

[johnt]

http://cgi.ebay.com/ws/eBayISAPI.dll...867556262&rd=1

[LeeWay]

Thanks for the links, Guys, and thanks to Chris. He had some that he was able to sell to me. A very good price, comparing to the Ebay link. If anyone else needs some, you might try PMing CBCNC. He did say that he had hundreds of feet.