(newbie) Need help with wiring:)

[mike3385]

I will come out by saying im completly new to the whole electronics world. I am trying to convert my speedway homier 7x12 mini lathe into cnc. I got as far as hooking up my fet/3 dynamic kit from stepperworld.com to my machine and computer. I also bought a variable speed control board from cnc4pc.com along with a index pulse card. I believe they were the correct things to buy in order to control and keep track of my spindle but the only problem is i don't know much about wiring it. Cnc4pc has tutorials on how to wire but i would still like to look to you guys for some help through this so i don't fry anything. I took pictures of the main board for the motors, the variable speed control board, index pulse card, the electronics from inside my machine and a plug. I can get bigger closer pictures apon request if it helps any but here is as far as i got so far. Maybe someone can connect the dots? If you go to cnc4pc.com the turorials are on there if that will help any. Thank you

[bharbour]

What you are asking is completely open ended. If you ask specific questions, you will get pretty good answers here.

If you can't get to specific questions or the answers don't make sense, you might have better luck if you could find someone local who knows how to do this and has the time and supply them with pizza and libation while they figure out what you need and help you with it.

I am sorry if I sound rude on this. What you are asking will take someone a lot of time to sort out and type answers to you.

BobH