| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| General Electronics Discussion Discuss basic electronics, power supplies and anything else electronic related here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
08-31-2009, 12:00 PM
| |||
| |||
I work on all my own machines but this ones killing me. I have a Takisawa V1e that won't complete the tool change cycle. The z axis goes up and carousel changes to the right tool but won't come back down to complete cycle. If I tell it M6T1 it goes up and rotates to tool#1 then stops before it comes down to complete the cycle.If I hit reset then M6T1 again it will complete the cycle perfect. It only completes the cycle on tool #1 if it's the carousel is on tool#1 already. I've checked to see if it's counting on the parameter page and everything I see is working right except for completing a tool change after M86 command. Any help would be appreciated! Thanks Mike   |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| VF-2SS Tool Carousel Problem | JoBwan | Haas Mills | 18 | 05-25-2011 01:07 PM |
| tool carousel position problem | Greg 24 | Haas Mills | 4 | 10-19-2009 03:44 PM |
| Program stop/Tool Carousel problem | dylskee | Haas Mills | 5 | 11-29-2007 03:46 PM |
| tool carousel alignment | rubino2112 | Machine Problems, Solutions , Wireless DNC, serial port | 0 | 12-27-2006 12:26 PM |
| Spindle Bearing/Tool Carousel Motor??? | AdvancedMfg | Industrial Hobbies (Support forum) | 0 | 12-04-2005 09:25 PM |
| | |
Takisawa tool change carousel help 
Linear Mode
