Results 1 to 2 of 2

Thread: Rongfu RF-31

  1. #1
    Registered
    Join Date
    Jan 2009
    Location
    US
    Posts
    3
    Downloads
    0
    Uploads
    0

    Rongfu RF-31

    I have a RF-31 mill that I would like to convert to three phase. I'm having trouble locating a 3 phase motor for this machine. I would greatly appreciate help locating this motor.


  2. #2
    Registered Bubba's Avatar
    Join Date
    Mar 2004
    Location
    LaGrange, GA USA
    Posts
    1,494
    Downloads
    0
    Uploads
    0
    lucky
    several years ago, I bought a combination deal from http://www.dealerselectric.com/. At that time, he had combination packages of motor and vfd available, but don't seem to find them now.


    The "biggest" problem I had was that I wanted to use the original motor pulley and had to bore it out to fit the shaft of the motor. For some time, I put a single pulley on the motor and used it that way, but wanted to be able to get low rpm usage (<100 rpm) and the combination I had would not give me any torque in that area.
    Art
    AKA Country Bubba (Older Than Dirt)


Similar Threads

  1. Rongfu vs. Grizzly
    By klondikebike in forum Benchtop Machines
    Replies: 3
    Last Post: 02-08-2007, 12:53 PM

Posting Permissions


 


About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed


Search Engine Friendly URLs by vBSEO ©2011, Crawlability, Inc.