STK6723HZ Help

[huben_123]

Hi guys

I have 6 of those (STK6723HZ )drivers from and old fotomaking machine. Does someone has any information/pdf for them ?

Thanks

[sam stone]

I got a pin out for the STK6723hz driver, see attached the pin out is from an Epson printer, but I got them and motors from an old Agfa 3130 photo prossesing Machine ( 7 Drivers 6 Motors {motors no problem}) and would like to recycle them ( stay green )

How ever I am electricaly challenged and have not been able to figure out how to wire them up so that i could hook them up to a printer port Basicaly i need Help !!!

If any one could make up a diagram that shows how to do that and what other chips have to be in the board i would really like thank them in advance

I am trying to make up a small 3 or 4 axis hobby cnc and would like to use ether K cam Or Mach 3 to run it but am stumped as to how to wire it up

sam