Newbie- My newbie electronics set up...

[numb-lock]

Hello All,

My CNC cutting surface will be 24 X 18 X 4 with an overall frame footprint of 34 X 30. The gentlemen at Hickory Ridge CNC is making it for me.

I'm currently trying to set up the electronics and was hoping to get some feedback from all of you on the list below. The first item is the SmoothStepper...cuz I already have it. I'm not too worried about the pricing for each...

Warp 9
Smooth Stepper (USB connection to PC)

CNC4PC
C23 Dual Port Multifunction CNC Break out Board (for the Smooth Stepper)

CandCNC
EZPlug Gecko Dual Servo Card (2)
EZPlug Card Mounting Plate Kit

HomeShopCNC
Nema 23 350 oz/in Peak Torque 60 VDC Servo Motors (3) with HEDS-9100 Optical Encoders
Gecko G320 Drives (3)

I still need:
Power Supply
Enclosure

Any advice/suggestions are appreciated...

Thanks,

Bob I.

[LaserImage]

Did you get your machine yet?

[numb-lock]

And I'm still trying to be patient with Rick...however, no communication is ever a good thing...he hasn't responded to my most recent emails. With all the trouble he's had...Maybe he's had a major health emergency? It would make sense.

Thanks,

Bob I.

[LaserImage]

I'll PM you some info about Rick...