turbo mod 6297-8200

[TEXAS1962]

howdy yall,my name is stanley.we just bought a TURBO CHIP CONVEYER,we have got 6 wires coming out of the control box,red,white,black,blue,orange.red,black,white arepower supply 220 3 phase .orange comes from the stop button blue one is coming out of the overload switch .can any one tell us what the voltage is and if it ac or dc.
the motor will come on if i push the starter switch in.what is the signal voltage that i we need.
thanks for yall's help!!!

[Al_The_Man]

If there is a contactor in there, then look at the coil voltage, this will indicate the voltage required for the control circuit.
Al.

[TEXAS1962]

THANKS AL,I THINK WHAT I WAS CALLING A SWITCH IS THE CONTACTOR,BUT YOUR TELLING ME IS THAT IT WILL BE ON THE CONTACTOR IT SELF .THANKS AND I'LL LET YOU KNOW IF AND WHEN I GET THIS THANG! GOING.
THANKS AGAIN!