| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| General Electronics Discussion Discuss basic electronics, power supplies and anything else electronic related here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
02-03-2008, 04:02 PM
| |||
| |||
i have stepper with a 201 geko on it .Ihave a 6 amp quick blow fuse on the + input line to the geko.problem motor is supposed to draw 3.5 amps per phase the fuse will blow after a jog after stopping the motor. It will hiss a little and pop the fuse have checked all wiring tested for shorts found none in motor windings or wiring from motor to geko.Now the motor is supposed to draw 3.5 amps per phase i have a 6amp fuse in. should the fusing value be the two phases combined .now i have two outher motors wired the same and one of the motors is twice the size of the problem motor they do not blow.they work fine i am suspecting a bad driver maybe its driving me nutts .  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Motor and Controller question | DistortedDesign | Stepper Motors and Drives | 3 | 02-16-2010 02:44 PM |
| tripswitches for fusing drives | daedalus | General Electronics Discussion | 3 | 11-22-2006 08:45 AM |
| Stepper Motor Question | Dman | Servo Motors and Drives | 2 | 01-15-2005 09:55 PM |
| geko 2002 project status ? | da21 | Gecko Drives | 3 | 12-14-2004 05:00 PM |
| geko 340 speeds | broncosis | Gecko Drives | 1 | 07-29-2004 06:08 PM |
| | |
motor geko fusing question 
Linear Mode
