wiring power supply

[elrieger]

Hi,
i have a 5axis controller with 5 seperate driver boards.
I need to send power to each of the boards seperately, could anyone tell me if i should connect all of these wires together to the connection on the power supply, or is there some kind of splitter i can use to connect the 5 sets of wires to the power supply?
If so please let me know where i can find such a splitter.
thanks
rick

[Al_The_Man]

They all should be connected at the power supply output termination, If the power supply connection is rather small to take all 5 wires, there is not alot commercially available without using say two 5 terminal blocks and making all 5 common on the top end of each 5 terminal strip, which leaves 5 bottom terminals for your drives.
Al.