Machine Safety

[Drakkn]

It seems a lot of people are using e-stops to cut the power to the motors on your cnc machines.

What about a method to automatically cut the power on your router at the same time.
My machines router is powered via mains supply

Any ideas - or has someone a tried and proven method already.

[Al_The_Man]

You can do it with a power relay or contactor, or a SSR (solid state relay) if you can find one with the correct rated output.
If you already have an e-stop relay/contactor, use one with with enough contacts to switch all the e-stop conditions, including the router.
Al.