Source for thin blank PCB - CNCzone.com-The Largest Machinist Community on the net!

epineh · #1 10-18-2007, 07:40 AM

I am after some thin blank PCB material, I think 1/32" (0.79mm) thick would be the best option, as I want to make double sided boards without a lot of hassle by printing two boards and joining back to back to make a poor man's double sided board with a finished size of 1.6mm.

I found the stuff on Digikey :

http://search.digikey.com/scripts/Dk...name=PC57-T-ND

but if anybody knows of Aus. suppliers that would be cool (not to mention a lot faster

)

Russell.

Greolt · #2 10-18-2007, 04:54 PM

Russell

Drop this bloke an email and ask him. He should know where to get some if not have it himself.

http://www.rcsradio.com.au/

Greg

epineh · #3 10-19-2007, 03:11 AM

Cheers Greg, I will give him a call next week.

Russell.

neilw20 · #4 10-19-2007, 04:40 AM

Originally Posted by epineh

Cheers Greg, I will give him a call next week.

Russell.

also try (in Melbourne Australia)
http://www.pcbeze.com/

epineh · #5 10-19-2007, 07:33 AM

Cheers neil, added to the list !

Russell.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blank Screen	star-turn	Europe Club House	0	07-29-2007 01:54 PM
Premachined blank	camtd	Mastercam	1	06-16-2007 11:56 AM
Fanuc 3M Blank Screen	nastek	Fanuc	0	10-31-2006 08:56 AM
where to source motorcycle blank hubs?	SRT Mike	General Metalwork Discussion	3	09-17-2006 05:12 AM
Blank PCB's available	pminmo	Open Source Controller Boards	13	09-14-2005 05:27 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)