06-26-2007, 10:47 AM
|
 | | | Join Date: Apr 2006 Location: Pakistan Age: 32
Posts: 2,850
| |
I have purchazed FET-3 dynamo controller card from stepperworld.com but it is not working although i checked all cabling many times. only x-axis motor jitters wheras there is no response from Y and Z axis.
I have read through the manual many times but i have not found any discrepancy in my cabling. I checked all circuit + components through voltage meter and ohmmeter but all found okay.
currently in following pictures i just connected z-axis drive with Hi-torque jumper position. please tell me what i m doing wrong.
Best regards. |
Linear Mode
