Dilema

[metalcraft.hr]

I building CNC plasma cutter table and can't decide between

http://www.lowcostcncretrofits.com/

and

http://www.candcnc.com/

I am new in this, I read most of the board but I can't decide
which electronics to order here in Europe and where to find
plans for metal construction of the teble for one of this
electonic kit's.

Manny thanks on all help to everyone.

[metalcraft.hr]

Can anyone suggest me YEAH or NO option?

[Piobaire]

www.ajaxcnc.com

Depends how large the cutter should be and how much you want to mess (work) with yourself.

Best regards
/T
Sweden

[metalcraft.hr]

Originally Posted by Piobaire www.ajaxcnc.com Depends how large the cutter should be and how much you want to mess (work) with yourself. Best regards /T Sweden

Interesting..., but before purchasing any of electronics I seeking good plans for building plasma desk.

I can't beleve that there is no plasn to buy for building simple 1,2m X 2m plasma table and Z router in one machine anywhere on net...

[Piobaire]

Hi!

No, I've not seen any plans but it could not be that difficult...
One hint is to look for standard aluminium profiles that you cut ans assembly quick and easy with ordinary bolts amd nuts. Then use linear guide rails with trolleys (or what's it called in english) I use from Bosch Rexroth here in Sweden (STAR linjärteknik) and they also have ballscrews.

http://www.boschrexroth.com/business...ukte/index.jsp

You probably don't need the best accuracy on a plasma bed so there should be cheeper alternatives to find.

In my opinion forget steppers and go for servo motors. Depends on the budget of cource, but a better start is much more worth at the end.

Good luck!
Best regards
/T

[metalcraft.hr]

I don't know if I understand that desk is no problem of accuracy that servos i important for accuracy. I planned for using roller whells for sliding doors because in Croatia I can't find aluminium profiles. Gantry is more problematic because parts.

I also planned servos... but how I say specific parts here is proble so I need to think something because I don't want to put on machine chain system but lath...

p.s. It will be steady for me to have some serious plan for building