which controller is good ?

[serkanozfe]

i am going to start to make new router.
but i don`t know which controller is good ?
deskcnc , hobbycnc , MC433 (soc-machines ) os another ?

Thanks

[DRD]

What are you doing with your application and machine?

[SORCHEROR]

why not build your own controller?i recomend the keling or gecko drivers my self.best performance and reliability,heres kelings site link,http://www.kelinginc.net/,check it out,they also have complete kits

[SORCHEROR]

http://www.kelinginc.net/
try this link the other get messed up

[serkanozfe]

Thanks For answers.
i am gonna build 3 axis milling machine. act. i used deskcnc card and software before. it was good, but it`s expensive. if i can do same things with other cards i am gonna try other cards.
but which one fast ? which one smooth ? which one good for condition ?
i don`t know.
if you tried some one can you write me please?
Thanks

[SORCHEROR]

i have used geckos drivers 201 they run smooth and lots of power,up to 80 volts too,i used 54 volt supply gave my 1100 oz/in motor alot of top speed with good torgue too,keling has simialr too gecko also for alittle less price
steve