can some one help me with this

[thesaent14]

hey guys i like to know what can i do with this i am a total newbie at this i just got me this from a guy online but i think i need more parts can any one help me out to complete this com and how to set it up anybody with some info please on this


this are the motors

here is one of the parts

and this is the secund one


what ells i need to set this up in my machine thanks

[rippersoft]

You will need a BOB or parallel port breakout board. This connects to the computer and the drivers.

You need to choose what program to run the machine with. Turbo CNC, Mach, EMC2, etc.

You will also need a powersupply for the steppers. 24VDC to 36VDC will provide plenty of push for the motors. Rate the amperage based on the current draw per phase of your steppers.

Also, go to the Oriental Motors site and lookup your motors. Download the PDF for the motors and read what the specs are.

http://www.orientalmotor.com/product...tors/index.htm

You will also be able to find alot of info on this site. Many people here are very happy to help and point you in the right direction.

RipperSoftware.