Lots of industrial sensors for trade!!!

[Sputnik]

I have a lot of industrial optical, fiber optic, capacitive proximity etc im looking to trade for some steppers and controllers.

These are inductrial types used on machines and automation equipment. They are from Baumer Electric, Sunx and Keyence.

There are fiber optic sensors/amps with fibers. Optical break beam sensors (transmitter/receiver type and retro reflective type), mini/micro break beam sensors. Capacitive proximity sensors etc., etc.,etc.

Most are brand new in the box with only 2 or 3 used ones.They have manuals and mounting brackets with all of them. I have fiber cables for the fiber optic ones. Some are fully programmable,some have just a sensitivity adjustment.

These are perfect for limit switches etc on CNC machines etc.

There is also a liquid level sensor that would be good for coolant tank level sensing.

They operate on 10-30v or 12-24v, however can be interfaced to 5v TTL with appropriate current limiting resistors.

The pics just show some of it, there is more than that. I have estimated the whole lot to be worth several thousand dollars. There are a few sensors in there that retail for over $400 each and the very least expensive one is like $75

I also have a few misc. encoders in the lot. there is also a bunch of other misc hardware etc that pertains to all this stuff, cables etc.

Im looking to trade the whole lot off for some steppers and controllers for my mill and lathe, willing to work out a deal.

This would be a good money maker for someone to separate and re-sell, I just dont have the time, WAY too much stuff to mess with.

If you are interested I can take some better pics and give more specific info.



Thanks

P.S. I was going to post it in the ads section but couldnt figure out how to pay via PayPal and im not actually selling it, unless someone makes an offer.

[jderou]

Play guitar?
Noticed the Fender logo and the accoustical tiles.
Nice stuff BTW, what size steppers and what kind of controller are you looking for?

[Sputnik]

Yep, this room used to be my studio. Thought I would leave the tiles up for the heck of it, they are glued up with liquid nails anyway. You?

Well just looking for some motors with at least 120oz torque nema 23. The controllers do not have to be extravagant, just worthy of the motors they will be powering.

[jderou]

Oh yes, drums and guitar. I am hoping to be able to build a soundproof studio in my basement one of these days, so I can make all the noise I want.

Joe

[Sputnik]

I play drums also. I converted a set to e-drums so I do not need a sound proof room, headphones take care of that!!!

[Sputnik]

Would anyone be willing to trade 3 270oz steppers for all this stuff??? It would be well wort it.