Where can I buy the boards for the Control Crusader II?

[blmachado]

I have a mill with an Anilam Control Crusader II and need to buy the 3 boards that control the drivers. The drivers are

SEM MT30E4-30
STALL TORQUE 1.1 NM
MAX RPM 2500 VOLTS 75
PULSE AMPS 22
TACHO 9.5 VOLTS/1000 RPM INSUL F
ANILAM PART 370-10 D82-2040
GABINET HAS 3 TRES CAPACITORS
The connection box ANILAM 1-10


Does anyone know where I can find these boards? I tried anilam and glentek but they don't have it

Thanks

[NC Cams]

Looks like the control card is a servo amp for a DC servo with a tach feedback.

Legacy boards like that which are exact drop in replacments will be hard to find.

You might want to check out Advance Machine Control (AMC). They have several DC servo amps with tach f/b.

Another outfit to check is Cleveland Machine Control (CMC). THey sell Motion Science amps and I"m pretty sure they have ones that can also be adapted.

It may be as simple as swapping wires to equivalent input pins, retuning and away you go.

[blmachado]

[kiwiavi]

Have you got any boards as yet ?
Cheers Wallace