05-02-2006, 08:56 PM
|
| | | Join Date: Dec 2005 Location: United States
Posts: 201
| |
Im retroing a old cnc to a new controller. I would like to use Gecko Drivers. I dont know which Gecko i need. If you guys could tell me that would be great.
My steppers are these:
Superior electric
M091-FD-6217
150OZ
1.8V 4.7a
Second Stepper:
Superior Electric
M062-LS-530E
1.65V 4.7A
100OZ
I want to use mach3 software.
Im running a 5.5hp Perske Spindle. I need to know how to wire the spindle into the computer. I have no idea how to do this. If you guys could help me on this it would be great. BTW the spindle is 220v.
Also if you guys could suggest a good breakout board. |
Linear Mode
