May not be as long as you want.
M20-9990246. - HARWIN - HEADER, STRAIGHT, 2.54MM 1ROW | element14 Australia
Where is n/a? Bit hard to guess where is convenient for you.
Basically its a strip of pins connected together with a piece of plastic. One side of the pin strip can be inserted into a PC board and soldered in place and the other could either get the same treatment or get pushed into a breadboard (the use I intend for it). Problem is the website I know of that useto sell them no longer does and I cant seem to find it on mouser since I dont know the right name of what I am looking for.
Similar Threads:
- header flanges
- Add comment in header?
- Need Help!- Predator header!
- Need Help!- What does this all mean in Lathe header?
- Need Help!- Pin out for Header
May not be as long as you want.
M20-9990246. - HARWIN - HEADER, STRAIGHT, 2.54MM 1ROW | element14 Australia
Where is n/a? Bit hard to guess where is convenient for you.
Super X3. 3600rpm. Sheridan 6"x24" Lathe + more. THREE ways to fix things: The RIGHT way, the OTHER way, and maybe YOUR way, which is possibly a FASTER WRONG WAY!
Thanks found it on mouser in category "Headers - Pin Strip"
So I put in my order to mouser and this is what I get for 5 pin headers... But this is just 5 individual pins off a single row header right?
I had someone else call them and tell them about the problem and was told by the person on the phone that this is how they are sold. A "tec" got on the phone and confirmed... WTF Is there any chance that I am wrong and these really are $.08 each pins and the proper way to sell them?
Mouser part number: 517-929834-01-01
the datasheet linked to: http://www.mouser.com/ds/2/1/ts0769-35914.pdf
I am not saying I am wrong but even if each pin is $.08 each wouldn't having them cutup like that still be wrong? The persons on the phone insist a single row header is what I got...
My bad I was just corrected from another forum. I got exactly what I bought!
Are you looking for a multi-pin (36) breakaway header?
0022284363 Molex Inc | WM6536-ND | DigiKey
They also stock dual row for IDC header.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
I searched ebay and see 2 pin header BINs of interest both of which I bought. One is 3x40 pin header for $0.99 and the pic shows gold plating another is 10x40 pin header for $0.99 and shows tin colored pins.