How Do I Wire This Power Supply?

[herring_fish]

I ordered this power supply:
350W 30V 11.5A Switching Power Supply Radio LED Charger US3
Unfortunately, I don't know how to hook it up. It has 9 places to connect wires. The label looks a little like this:

| +V ADJ | +V |_ _ -V _| +=+ | N | L |
--------- 1 2 3 - 4 5 6 ---7 --- 8 --9

The +=+ symbol is actually three horizontal lines that get smaller as they go down and it has a vertical line above that in the center. I think its the ground symbol.

Anyway, could you please tell me what goes where. I am trying to hook it up to a small controller board. Where does the 120V go in and where does the 30V come out?

Thank you

[radcliffe]

Herring Fish wrote:

| +V ADJ | +V |_ _ -V _| +=+ | N | L |
--------- 1 2 3 - 4 5 6 ---7 --- 8 --9

The +=+ symbol is actually three horizontal lines that get smaller as they go down and it has a vertical line above that in the center. I think its the ground symbol.

The +V ADJ is for minor adjustment of the Positive 30 Volts.

1 2 3: +V is the Positive 30 volts out three terminals 30 volts each.

4 5 6: -V is the negative or ground (return) for the 30 volts three terminals.

7: That is a grd. (earth ground) symbol. This is where your green wire (US)
connects to ground all metal cases. The round terminal on the plug that plugs in your outlet.

8: N is the neutral return (white wire) connection. This is the large or wide spade of the plug that plugs in your outlet.

9: L is the 120V load (black wire) that connects to the small terminal or spade of your plug that plugs in your outlet

Harold

[herring_fish]

That is exactly what I need!

Thank you