Hi I was wondering if this power supply will work ok for powering up my 3 640oz steppers driven by g202's and campbell combo board I have 2 of them? here is the link to the power supply data its the mean well scn800-48. http://www.meanwell.com/search/SCN-800/default.htm
here is the motor data:
Holding torque-Nm (oz/in) +/- 10% 640oz
Rated voltage 2.3v
Rated current per phase (amps DC) 5.5amp
I was told that it might not work if it's a switchmode supply.