G&L power supply for 8000B NT Controller

[Katoom]

We have lost our power supply for our G&L 8000B controller. The OEM power supply is a Powertech P/T-6235DN3N. It looks as if the power supply has been modified by G&L.
The prints show four connections from the power supply. The Mother Board,
the CD Rom, Hard Drive, and the Floppy. Our power supply has a 6 pin Molex
connector that only uses 3 of the pins. there is a 20ga white,blue,and brown
wires attached to the connector. This connector plugs into a board that is plugged into the mother board vertically. The connection on the board is not labeled.
G&L has not been able to help me,as they do not support the NT operating systems any more. The power supply even has the machine controller S/N#
455-0044 and still could not help.
What are these wires for or what do they do,voltage etc. I do know that it is a ATX power supply and have a new one as I type. Help Please.

[mike_Kilroy]

since no takers i will comment.....

we r g&l disty; it is our experience that g&l does not 'no longer support' anything... they may not have a replacement old part anymore, but ussually can rpr it or at least give u the wiring info u need to get something else.

that said, i wud be happy next tues to look into this for u if u can wait? post more info, pictures of the stuff to help identify it.