LinkBack URL
About LinkBacks
Just use the built in port. I've only read of one person in 8 years frying their PC, and it was due to serious miswiring issues.
If you're really worried, buy a spare motherboard for $20
http://cgi.ebay.com/Dell-OptiPlex-GX...item2c5cbaa503
| | |
Parallel Printer Port Card!? Hello, I am new to all things cnc so please bear with me. I have been posting here and have been receiving a lot of great help. I have a Dell GX620 SSF and have read that I should put a separate parallel printer port card in it so in case something goes wrong the card will be blown and not my whole system? I found a cheap card on ebay (link below), but don't know if it's up to par? Any suggestions are appreciated, THANK YOU!
db25 printer card items - Get great deals on Computers Networking items on eBay.com!
Just use the built in port. I've only read of one person in 8 years frying their PC, and it was due to serious miswiring issues.
If you're really worried, buy a spare motherboard for $20
http://cgi.ebay.com/Dell-OptiPlex-GX...item2c5cbaa503
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Thanks, hopefully I won't need to, and hope I don't make it number two! Good news then, thanks again
Posting Permissions
| | |
