| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| General Electronics Discussion Discuss basic electronics, power supplies and anything else electronic related here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
08-13-2005, 07:02 AM
| |||
| |||
Hi All I have a 115 to 12 VDC transformer taken from a PC accessory device. I`m using the transformer to power a panel LED. Near the end of the cord there is a cylindrical part attached that is approximately 1 inch in length and 5/8 in diameter. I`d like to cut the end of the cord but have no idea as to what affect the removal of the cylindrical part will have. Thanks Barry  |
|
#2
08-13-2005, 08:43 AM
| ||||
| ||||
| That is in all probabillity a ferrite suppressor, added to some cords for noise suppression, the removal won't affect the transformer operation. Al.
__________________ CNC, Mechatronics Integration and Machine Design. “Logic will get you from A to B. Imagination will take you everywhere.” Albert E. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
