| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| General Electronics Discussion Discuss basic electronics, power supplies and anything else electronic related here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
11-28-2010, 02:25 AM
| |||
| |||
hi, help i'm confused! i am running mach3, and would like to control the spindle with the pwm feature mach3 has, does anyone know how to do this, i assume i need a pwm board or varible dc motor controller. thanks  |
|
#2
11-28-2010, 07:03 AM
| ||||
| ||||
| What kind of spindle?
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
#4
11-28-2010, 10:40 AM
| ||||
| ||||
| That doesn't help me. Is it this one? Zen Toolworks LLC - The most affordable CNC DIY Kits for the professional and hobbyist Looks like you need a DC motor controller that varies the DC voltage, and is controlled by a 0-10V signal. You'll also need a board to provide the 0-10V signal, like a Digispeed. DC-04 DigiSpeed SL [DC-04] - US$48.00 : Homann Designs, The Preferred CNC Component supplier I'm not an expert at this, but I think it's right.
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need Help!- PMW spindle control | jkcab | Mach Software (ArtSoft software) | 3 | 08-01-2010 02:46 PM |
| spindle motor and spindle control dont work | customcncparts | Milltronics | 0 | 10-01-2009 02:08 PM |
| spindle control | uberdude | LinuxCNC (formerly EMC2) | 1 | 06-19-2008 07:33 AM |
| Can't control spindle | Mark Jackson | LinuxCNC (formerly EMC2) | 3 | 11-05-2007 10:34 AM |
| Using Flashcut CNC Spindle rotate card control to control laser power | pyroplotter | FlashCut CNC | 0 | 10-15-2007 09:46 PM |
| | |
Linear Mode
