Keling stepper motor bipolar parallel connection

[woodchuck5]

I recently purchased a 3 axis 640oz-in stepper motor kit from Keling and am trying to get it wired up. I have some experience with industrial controls but their spec sheet isn't very clear and it contradicts the color coding on the system schematic showing the power supply, stepper drives, and motors.

Which color wires are supposed to get tied together and go to A+, A-, B+, B- terminals on the microstepper controller?

Any help would be greatly appreciated.

Thanks,
Brian

[H500]

Call keling. If you are still unclear, post a link to the datasheets.

[Crevice Reamer]

Hi WC5. Welcome to the Zone!

I assume that you have the 8 wire motor.

The controller only has terminals for 4 wires, so some wires must be combined:

Blue plus yellow should be A+
Red plus Green is A-

Brown plus Orange is B+
Black plus White is B-

CR.