| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| General Electronics Discussion Discuss basic electronics, power supplies and anything else electronic related here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
06-23-2010, 06:34 PM
| |||
| |||
http://cgi.ebay.com/3-Axis-tb6560-CN...ht_4683wt_1137 Could anyone tell me how good this would be as a controller for a 3 axis mill. I will be using 3 nema 23 steppers and will probably drive them at 24-36 at 2 to 3 amps. Is this a good price/quality ratio. I am great with electronics but 60 dollars seems like a good deal to save me the time of gathering all of the parts, soldering etc. THanks!  |
|
#2
06-23-2010, 06:40 PM
| ||||
| ||||
| Do a google search here for tb6560. Lots of threads here.
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
#3
06-26-2010, 03:12 PM
| |||
| |||
| They should work if your power is 24v. If it approaches the max rating of the board, you will risk failure from transient voltage spikes. However, you will likely only get 1/2 the performance of a drive that can handle 50v. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Advice needed to set up Taig CNC mill | Mark Scrivener | Taig Mills & Lathes | 24 | 10-19-2010 10:26 PM |
| EMCO Compact 5 Lathe/Mill - advice needed | n_maher | Mini Lathe | 6 | 04-15-2010 08:26 PM |
| Advice Needed For Selling A Mill | TZ250 | CNCzone Club House | 1 | 05-07-2008 12:43 AM |
| Series I mill - some advice needed | acerocket | Bridgeport and Hardinge Mills | 8 | 08-08-2007 02:46 PM |
| Advice needed for Mill Feed Rate | raytor | Benchtop Machines | 4 | 03-25-2005 01:11 PM |
| | |
Linear Mode
