For Agie Classic 2S you have a service manual? I have a problem wit Gap-box cooling.Please replay at firstname.lastname@example.org
I am an ex Agie Charmilles applications engineer.
I offer training and applications support, from basic training, advanced and process optimisation.
Classic, Classic 2s, Challenge, Evolution, Excellence, Progress.
Also Camtek peps wire support
Charmilles Robofil Millennium control machines, 440, 240 and cc versions.
Agie Mondo Star EDM Die sink machines
Actspark SP Range of Die sink machines.
I can also support other edm machines please indiacte what type you have when replying.
Please contact me at
My new website is www.edmtraining.webs.com
for further details, please specify the type of machine you have.
ı have a agie 100d and ı use mastercam
my problem is angle cut
h1 h2 h3 where ı write this can you explane me ?
We have a problem with our EDM Mondo 50 machine, as follow :
During start up/ booting the machine display Error ( E95 ) Unable to load the machine device driver. And the machine can not continue the booting process.
For your info our machine have been up grade with Windows 98 operating system
Hello I am busy working with an Agie Charmilles EDM.We are using a new technology Direct Laser Metal Sintering.(DLMS).We are presently wiring through jobs that have a build structure which suuports the part during the building of the part.This turns to powder when cut by the wire and often breaks the wire due to the dust on it.Id be interested in hearing from anyone has had and overcome this problem.
email@example.com as I pick those up quicker