Thanks for your detailed review.I have been looking at this machine for a while now along with others.I was just starting to get attracted to a torchmate but now you have me 2nd guessing.I do have a few questions for you.
What size compressor are you using with this setup? I currently have a 60 gallon,5HP Ingersoll Rand but im wondering if I need to get an 80 gallon.
The cutting area is 4x4 basically,what is the overall width/length on this? Im guessing its not much more added to the cutting area but then again it did come on a huge pallet.
And last question...do you have any pictures of stuff you've cut? My max on my parts will be 3/8 thick and curious how these torches are handling that or close to that thickness.
Im still working on my new workshop so I have plenty of time to decide on a machine.Im super anxious though especially since im spending good $$$ on waterjet cutting for my basic cut outs I need.They are simple enough for a plasma thats for sure.I'll be so happy when I finally get my own table.Looking forward to your reply,thanks.